Back to Top

Phone +61 3 9310 3515

Monthly Archives: April 2019

ScarGuard on pipeline

Protecting pipelines from damage during HDD

Horizontal Directional Drilling (HDD) is now an established oil and gas construction technology method due to the minimised impact on the surface environment. However whilst disruption to the environment is minimised by employing this technology the demands made upon the pipeline coating itself are extreme and the damage risk is considerably elevated.

David Anderson is the Sales and Marketing Manager at Universal Corrosion Coatings (UCC), an Australian company that provides solutions to corrosion and material degradation issues in water, and oil and gas pipelines, marine, and civil infrastructure sectors. He said that asset owners and contractors need to be aware of the exact conditions their pipeline will be installed in and understand the challenges involved.

“Associations such the Australian Pipelines and Gas Association (APGA) frequently emphasise that when designing a pipeline, engineers have to consider all aspects of its operation, including how to mitigate corrosion and degradation,” Mr Anderson said.

“Now, with the increase in HDD installations this introduces abrasion and gouging forces way above and beyond the capabilities of conventional anti corrosion coatings.”

There is now a twofold consideration when designing a coating for a HDD service;

  • Selecting a proven anti corrosion coating usually provided by Fusion Bond Epoxy, #-Layer PE Coating or High Build Epoxy Coating.
  • Selecting an Abrasion Resistant Overcoat (ARO) to withstand the rigours of the HDD install.

Experience makes the selection of a proven anti-corrosion coating relatively straightforward. However, the selection of a durable abrasion resistant overcoat is somewhat more taxing because of lack of awareness.

Gouging damages on pipe

Canusa Scar-Guard Abrasion Resistant Overcoat

Canusa’s Scar-Guard is a high tensile woven fiberglass cloth, factory pre-impregnated with Urethane Resin that can be readily factory or field applied to protect pipeline coatings against aggressive HDD environments.

Canusa’s Scar-Guard is proven to protect anti-corrosion coatings such as FBE, 3LPE, HBE Heat Shrink Sleeve against abrasion, gouge and puncture.

Scar-Guard is cold-applied with a spiral wrapping application and is moisture-cured. The curing commences during the application process and within minutes a rock hard outer layer forms over the anti corrosion coating.

No special tooling is required and temperature extremes do not affect the speed of application.

“HDD Technology provides immense benefits over traditional trench installation and when combined with Canusa Scarguard Abrasion Resistant Overcoat, Pipeline Coating Integrity is assured,” Mr Anderson said.

Nu-bolt product on pipeline

Eliminating corrosion at pipe supports

Corrosion occurring at pipe supports is one of the biggest causes of pipe failure in Australia. If this problem isn’t addressed quickly, there is a risk that entire sections of the pipe will fail. This can be a particularly big problem for beam supports, saddle supports and pipe shoes at refineries and terminals.

What causes pipe support corrosion?

A myth in the pipeline industry is that corrosion at pipe supports is due to the abrasive metal to metal contact between the pipe and the support.

When in fact, crevices can be created between the pipe and its support, allowing water to be trapped in them. This trapped water is then in constant contact with the pipe’s coating for a long period of time and this immersion weakens the coating’s effectiveness, especially if the coating’s specifications were only for intermittent immersion protection.

With the coating then not providing protection from the outside environment, corrosion occurs, which can lead to premature pipe failure. For pipelines at Australian oil and gas refineries and terminals, not only are repairs or replacements a costly and time-consuming process, but pipe failure can have extreme safety and environmental consequences.  

The design of standard pipe supports often makes it difficult to undertake inspections, which is the only reliable way to identify crevice corrosion. The best solution to this problem is to eliminate crevices from occuring in the first place.

Removing crevices and improving inspectability

Nu-Bolt product

David Anderson, Sales and Marketing Manager at Universal Corrosion Coatings (UCC), said there are a few things companies need to keep in mind in order to stop crevices from being created.

“Pipeline installations need to implement pipe supports that minimise the contact between the pipe and the support while also allowing for easy maintenance and withstanding any temperatures or harsh environments they are subject to,” Mr Anderson said.

UCC is an Australian company that provides solutions to corrosion and material degradation issues in water and oil and gas pipelines, and the marine and civil infrastructure sectors.   

UCC is the exclusive distributor of Deepwater Corrosion Services’ Nu-Bolt and I-Rod pipe support for Australia, New Zealand and Papua New Guinea. Deepwater Corrosion Services created the Nu-Bolt and I-Rod pipe support and specifically designed it to combat crevice corrosion. The Nu-bolt contains the I-Rod, a high-strength thermoplastic rod in a half round shape with a modified pipe U-Bolt.

Its half round configuration creates a fixed distance between the pipe and support so water won’t accumulate in between. The standoff insulates electrically and improves maintainability and inspectability.

There are also a range of corrosion-resistant treatments that can be applied if it is operating in a highly corrosive environment. For the vast majority of applications, the standard I-Rod Thermoplastic is the best choice as it has good quality compressive strength and low creep but for temperatures above 180°F, I-Rod HT or PEEK can be substituted.

For further protection, UCC also offers the I-Rod Clip to eliminate crevice corrosion at saddle clamp supports, grinnell clamps and pipe shoes. This works by being placed on the inside diameter of the support, providing a low-profile standoff.

“The Nu-Bolt and I-Rod pipe support is producing major benefits onshore in the midstream and downstream sectors across the US and Europe. If Australian operations are experiencing pipe damage and failures due to crevice corrosion, it’s crucial that crevices are eliminated right at the start,” Mr Anderson said.